
CoaXPress I/F
Single-Dual Channel
Frame Grabber
APX-3662
APX-3662 is a Frame Grabber board which realizes video data transmission from a camera at speeds of 6.25Gbit/s with a single coax cable.The transmission speed reaches 12.5Gbit/s in CXP-6 Dual with two coax cables and the data transfer rate of the local system bus is also accelerated by PCI Express bus.
The specification and externals of product are for the improvement and might be changed without previous notice
Features
●Supports CoaXPress interface CXP Dual and achieves high-speed data
transmission at Maximum 12.5Gbit/s with two cables for image acquisition
●512MB DDR3 frame buffer memory
●Encoder signal input(RS-422) for control of image acquisition
●Allows to initiate of image acquisition at external timing
●Mounted general input pin(TTL input) and general output pin (open collector) to interface with external devices
●RoHS compliant
●Optional software development kits:ACAPLIB2, AZP-ACAP-02(Windows)
Specification
| Model |
APX-3662 |
APX-3662-1 |
| Image Acquisition I/F |
CoaXPress Rev1.0
CXP-6 Single(6.25Gbit/s), CXP-6Dual(12.5Gbit/s) |
| Image Input Formats |
8, 10, 12bit monochrome/RGB |
| MEGA-FIFO |
DDR3-SDRAM 512MByte |
| GPOUT |
1ch(TTL/Open collector) |
| Synchronous Input |
External trigger
(TTL/Open collector/Differential signal RS-422) |
Encoder |
RS-422(line driver), A/B/Z-phase 1MHz(MAX)
32bit counter,
32bit/16bit comparator for each
(Generates image acquisition trigger when the comparator is matched)) |
GPIN |
1ch(TTL/open collector)
Rear I/O |
1ch(TTL/open collector)
On-board |
| Interrupt |
Initiate of image acquisition,End of DMA, GPIN etc... |
| Camera Power Supply Output |
Power Over CoaXPress: +24V(13W)×2 |
| Image Distribution (Option) |
CoaXPress output from
TX connector |
− |
| System Bus |
PCI-Express (Gen2)×4 lane |
| Power Requirements |
+12V (+12V external connector) |
| Environment
|
Temperature:0℃ to 50℃
Storage temperature: -20℃ to 70℃ |
| Dimension |
190.00mm×
111.15mm
Panel width:20mm |
| OS |
Windows |
| Software(Option) |
Development kit: AZP-ACAP-02 |
|
Panel
APX-3662

APX-3662-1
Supported Cameras
Adimec, NED
For more information regarding supported cameras unlisted above,
please contact us.
Cables Makers
Canare Electric,
Belden, Gepco
Other document
Block diagram
Software: SDK-AcapLib2
Q&A: SDK-AcapLib
TOP